Free Ground Shipping on All Domestic Orders Over $75
(Ends Thursday at 11:59 PM EST)
(Ends Thursday at 11:59 PM EST)
This is the GLOSS WHITE design. AktiMate Mini is an active two way system negating the need for a separate amplifier, as it has its own 40 Watt per channel amplifier built in to one of the speakers. There is an iPod dock concealed under a cover flap on the top of the active speaker; this dock also accepts the iPhone. The rear panel jack plug accommodates the connection to an MP3 or MP4 player or your computer via the 3.5 mm input. RCA stereo inputs permit connection of any hi-fi source product, like a CD Player, tuner etc. RCA stereo outputs to allow for the connection of a subwoofer. Should the desire be to run a second pair of AktiMate Mini speakers, the RCA outputs accommodate daisy chaining which will provide independent volume control in each location. It has composite video output for connection to a larger monitor (handy if your iPod has photo storage or video clips; compatible with earlier edition iPods to version 5 and Nano version 2).
The AktiMate Mini is ideal for use as your television speakers - they are fully shielded, so placement alongside a monitor presents no problem. A voltage selector switch permits a change of voltage should you wish to travel to a part of the world using different mains voltages. The volume control on the front panel allows ease of operation - a control which, with a simple press, takes the system into standby. The AktiMate Mini has remote control and comes with a small but perfectly formed handset! The remote handset not only controls the volume of the speakers plus mute and standby, but also all basic functions of an iPod. Each speaker stands 30 cm high. AktiMate Mini comes complete with a connecting speaker cable, a 3.5mm cable, rubber feet; the cradle which comes with your iPod fits neatly into the AktiMate dock.
Specifications:
Configuration: 2-Way active bookshelf speakers (1 active master speaker/1 passive slave speaker).
Power Output: 40 W into its own 4 Ohm speaker load
Woofer: 130 mm (5.25 inches) mid/bass with molded polypropylene cone; shielded magnet.
Tweeter: 25 mm (1 inch) metal dome with neodymium magnet; Speakers driver used in AktiMate are licensed from Epos Limited U.K.
Frequency Response: 58 Hz - 28 kHz.
Power Amplifier: Type Class A/B (built in) 40 watts per channel RMS; Nat-Semi LM4766 Overture; Burr-Brown PGA2311 digitally controlled analogue volume control.
Transformer: 120W Toroidal power transformer.
Inputs: 1 Pair Stereo RCA sockets; 1 3.5 mm jack; iPod dock.
Outputs: 1 pair RCA sockets (unfiltered) for connection to sub-woofer or to daisy-chain AktiMate speakers; Video output (suitable only for iPods to generation 5 / Nano generation 2).
Connections: USB for charging purposes only (iPod or MP3).
THD: <0.05%
Crosstalk: <50dB.
Input Impedance: 10 kOhms unbalanced.
Passive speaker impedance: 4 Ohms.
Protection: Output current limiting, Thermal over-temperature, Power on/off transient protection; Replaceable external mains fuse.
Mains voltage: 240/120V; 50/60 Hz.
Inclusions: Right angles IEC power cord; Connecting speaker cable; 3.5mm connection cable; iPod accessory pack - note this is a selection only (the accessory which came with your iPod fits into the AktiMate dock); 4 mm banana plugs; IR remote control.
handset.
Size: 300 x 185 x 210 mm.
Weight: 12 Kgs.
The AktiMate Mini is ideal for use as your television speakers - they are fully shielded, so placement alongside a monitor presents no problem. A voltage selector switch permits a change of voltage should you wish to travel to a part of the world using different mains voltages. The volume control on the front panel allows ease of operation - a control which, with a simple press, takes the system into standby. The AktiMate Mini has remote control and comes with a small but perfectly formed handset! The remote handset not only controls the volume of the speakers plus mute and standby, but also all basic functions of an iPod. Each speaker stands 30 cm high. AktiMate Mini comes complete with a connecting speaker cable, a 3.5mm cable, rubber feet; the cradle which comes with your iPod fits neatly into the AktiMate dock.
Specifications:
Configuration: 2-Way active bookshelf speakers (1 active master speaker/1 passive slave speaker).
Power Output: 40 W into its own 4 Ohm speaker load
Woofer: 130 mm (5.25 inches) mid/bass with molded polypropylene cone; shielded magnet.
Tweeter: 25 mm (1 inch) metal dome with neodymium magnet; Speakers driver used in AktiMate are licensed from Epos Limited U.K.
Frequency Response: 58 Hz - 28 kHz.
Power Amplifier: Type Class A/B (built in) 40 watts per channel RMS; Nat-Semi LM4766 Overture; Burr-Brown PGA2311 digitally controlled analogue volume control.
Transformer: 120W Toroidal power transformer.
Inputs: 1 Pair Stereo RCA sockets; 1 3.5 mm jack; iPod dock.
Outputs: 1 pair RCA sockets (unfiltered) for connection to sub-woofer or to daisy-chain AktiMate speakers; Video output (suitable only for iPods to generation 5 / Nano generation 2).
Connections: USB for charging purposes only (iPod or MP3).
THD: <0.05%
Crosstalk: <50dB.
Input Impedance: 10 kOhms unbalanced.
Passive speaker impedance: 4 Ohms.
Protection: Output current limiting, Thermal over-temperature, Power on/off transient protection; Replaceable external mains fuse.
Mains voltage: 240/120V; 50/60 Hz.
Inclusions: Right angles IEC power cord; Connecting speaker cable; 3.5mm connection cable; iPod accessory pack - note this is a selection only (the accessory which came with your iPod fits into the AktiMate dock); 4 mm banana plugs; IR remote control.
handset.
Size: 300 x 185 x 210 mm.
Weight: 12 Kgs.
Customer Reviews





